Fixtures

Indoor / Outdoor Display Fixtures

Poster Flex Snap Frame

This premium double-sided sidewalk sign features the “Snap Frame System”. The water or sand-filled base with a handle and wheels makes this stand easy to move so it’s the perfect choice when your signage must be brought indoors overnight. The stand measures 45” high and has a visible graphic area of 23” x 32.5” per side.

FX050

Snap A-Frame

This premium quality double-sided sidewalk sign features the “Snap Frame System”, allowing for easy and fast graphics changes. The stand measures 45” high and has a visible graphic area of 23” x 32.5” per side.

FX051

Cedar A-Frame

This quality double-sided sign holder is built using cedar and then finished with two coats of deck sealer. This indoor/outdoor fixture will hold two 24” x 36” posters. The overall height of the stand measures 45”.

FX052

Cedar Poster Stand

This quality double-sided sign holder is built using cedar and then finished with two coats of deck sealer. This indoor/outdoor fixture will hold two 24” x 36” posters. The stand measures 67” high.

FX053

Economy Poster Stand

Economy single or double-sided sign holder. Constructed of ¼ inch black powder-coated steel. This economy indoor/outdoor fixture will hold two 24” x 34” posters. The stand measures 49” high.

FX003

Mini Cedar A-Frame

A chip off of the old block that holds two 12” x 18“ graphics or an optional chalkboard. This quality double-sided sign holder is built using cedar and then finished with two coats of deck sealer. The overall height of the stand measures 29”.

FX054
Optional Whiteboard - FX054-W (additional cost)
Optional Chalkboard - FX054-B (additional cost)

Economy Corex Stand

Economy single or double-sided sign holder. This indoor/outdoor fixture is constructed of 3/8” black powder-coated steel and will hold one or two 16.5” x 23.5” posters. The stand measures 49” high.

FX002

The Wobbler

This standard grade single or double-sided sidewalk sign features a spring mechanism in the base that allows the sign to wobble and sway in the wind instead of tipping over. The stand handles variable size graphics up to 24” x 36” mounted on corex, rigid PVC or foam core boards.

FX055

Quicksign

A double-sided sign featuring easy-to-change graphics and a molded-in handle for easy movement. Simply slide two single sided 24” x 18” graphic panels into the Quicksign and it’s ready to go.

FX056

Signpro II

This double-sided sign holder has all of the features of the Quicksign with the advantage of larger graphics. Simply slide two single-sided 22” x 28” graphic panels into the SIGNPRO II and it’s ready to go.

FX057

Cedar Pallet Sign Holder

This quality single-sided sign holder is designed to work in conjunction with displays featuring palletized products. The holder interlocks with the open ends of the pallet and holds an 11” x 23” graphic. The overall height of the holder is 47”.

FX059

Indoor / Outdoor Director

This lightweight sign points people in the right direction. Made of high-density polyethylene, the stand telescopes from 56” to 76” in height. Fill the base with water or sand if ballast is needed. The 16” x 23” arrow-shaped surface provides high visibility and comes with two removable vinyl signs that you can write on with marker or use preprinted vinyl signs.

FX060

Outdoor Fixtures

Indoor / Outdoor Banner Fixture

This fixture is designed to help our vertical banners take what Mother Nature can throw at them. They are designed to mount on wooden posts using lag bolts or screws or on steel pipes using hose clamps. The fixtures are made of high quality steel with heavy welds. They are then zinc-coated before they are powder-coated to add an extra layer of rust protection. The flange was made wider to allow movement and disperse wind energy even when over tightened.
Download Instructions

FX044

Billboard and Bench Card Holders

Available in either black powder-coated or galvanized steel.

11" × 7" x 30"	Billboard Fixture	Black	FX006
11" × 7" x 30"	Billboard Fixture	Galvanized	FX006A
11" × 7" x 18"	Billboard Fixture	Black	FX017
11" × 7" x 18"	Billboard Fixture	Galvanized	FX011
7" × 11" × 18"	Billboard Fixture	Galvanized	FX013
11" × 7" x 12"	Billboard Fixture With Base	Galvanized	FX012
7" × 5" x 30"	Bench Card Fixture	Black	FX008
7" × 5" x 30"	Bench Card Fixture	Galvanized	FX008A
7" × 5" x 18"	Bench Card Fixture	Black	FX016
7" × 5" x 18"	Bench Card Fixture	Galvanized	FX009
7" × 5" x 12"	Bench Card Fixture With Base	Galvanized	FX014
5" × 4" x 18"	Bench Card Fixture With Base	Galvanized	FX010

11" × 7" Billboard Face Plate

Available in galvanized steel. Allows billboards to be mounted horizontally or vertically to almost any surface.

Galvanized - FX006B

7" × 5" Bench Card Face Plate

Available in galvanized steel. Allows bench cards to be mounted horizontally or vertically to almost any surface.

Galvanized - FX008B

Billboard/Bench Card Base Plate Adapter

Available in galvanized steel. Allows either billboard or bench card holders to stand upright whenever putting a stake into the ground is not an option.

Galvanized - FX015

Round Rod Frame

Heavy duty exterior sign frame made from steel rod. Fixture dimensions are 25.6" × 41.75” with a graphic area of 24” x 18” printed on an aluminum sign blank. Secure using D-rings or zip ties.

FX043

Angle Iron Frame

Heavy duty exterior sign frame made from 1” flat steel. Secure rigid substrate using 4 eyeholes. Can be single or double-sided.

36" × 24" - FX041
24" × 18" - FX042

T-Stake

Heavy duty yard sign stake. Holds signs up to 24” x 36”. Signs mount single or double-sided.

FX040

U-Top Upgrade

Heavier duty stand can be purchased and is an upgrade with each Yard Sign purchased.

X044 - w/o sign
FX044U - Upgrade w/ sign

H Stands

"H" shaped wire frame inserts into the flutes of your yard sign. Free with each yard sign purchased.

Retail Fixtures

Banner Floor Stand

This indoor/light duty outdoor banner stand is one of our best values. The 30” x 47“ double-sided banner stands 6’6” tall and can be seen from a distance. Versatile enough to be utilized indoors and out.

FX001

Versatile Heavy Duty Banner Display

This indoor display offers excellent stability, easy adjustment and two-sided display capability. The unit has a variable display area from 12” to 24” wide and 48” to 90” in height.

FX064
Optional 3/8" Steel Dowels - FX065A (additional cost)

Versatile Table Top Banner Display

This table top display offers all the same features as the Versatile Heavy Duty Banner Display in a smaller package. The unit has a variable display area from 12” to 24” wide and up to 48“ in height.

FX066

The View Sign Display

This indoor display gently slants to make details such as directions or maps easier to read than with traditional stands. With a professional black finish, this display stands 55” in height and holds a 22” x 28” sign.

FX067

Deluxe Mini "L"

This sturdy display features aluminum snap rails for easy change of graphics. The heavy duty base provides stability and makes it ideal for long-term counter top displays. Graphic size is 11.8” x 15.75”.

FX068

Rectangular Tubing Sign Displays

Use the same amount of floor space to display one, two or three 22” x 28” signs. All units are made of sturdy rectangular tubing. Visible graphics from both sides are a perfect way to grab attention. All units available in Chrome finish.

Single - FX061
Double - FX062 (shown)
Triple - FX063